eLibrary >
BS EN ISO 13934-1:2013 Textiles. Tensile properties of fabrics - Determination of maximum force and elongation at maximum force using the strip method >
BS EN ISO 13934-1:2013 Textiles. Tensile properties of fabrics - Determination of maximum force and elongation at maximum force using the strip method, 2013
- Section sec_1
- Section sec_2
- Section sec_3
- Table tab_a
- Figure fig_1
- Section sec_4
- Section sec_5
- Section sec_6
- Section sec_6.1
- Section sec_6.1.1
- Section sec_6.1.2
- Section sec_6.1.3
- Section sec_6.1.4
- Section sec_6.1.5
- Section sec_6.1.6
- Section sec_6.2
- Section sec_6.3
- Section sec_6.4
- Section sec_6.5
- Section sec_7
- Section sec_8
- Section sec_8.1
- Section sec_8.2
- Section sec_8.3
- Section sec_8.4
- Section sec_8.4.1
- Section sec_8.4.2
- Section sec_9
- Section sec_9.1
- Section sec_9.2
- Table tab_1
- Section sec_9.3
- Section sec_9.3.1
- Section sec_9.3.2
- Section sec_9.4
- Section sec_9.4.1
- Section sec_9.4.2
- Section sec_9.5
- Section sec_10
- Section sec_11
- Annex sec_A
- Annex sec_A.1
- Table tab_A.1
- Annex sec_A.2
- Annex sec_B
- Table tab_f
- Figure fig_B.1
- Reference ref_1
- Reference ref_2
- Reference ref_3
- Reference ref_4
- Reference ref_5
- Reference ref_6
- Reference ref_7
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principle
- 5 Sampling
- 6 Apparatus
- 6.1 CRE machine
- 7 Atmosphere for conditioning and testing
- 8 Preparation of test specimen
- 8.1 General
- 8.2 Dimensions
- 8.3 Preparation of test specimens
- 8.4 Wet test specimens
- 9 Procedure
- 9.1 Gauge length
- 9.2 Rate of extension or elongation
- 9.3 Mounting of test specimens
- 9.4 Operation
- 9.5 Tests on wet test specimens
- 10 Calculation and expression of results
- 11 Test report
- Annex A (informative) Suggested procedure for sampling
- Annex B (informative) Locations of test specimens cut from a laboratory sample
- Bibliography [Go to Page]