Expand All
TOC Search:
Earth and Space 2016 - Engineering for Extreme Environments, 2016
- Cover
- Copyright
- Preface
- Acknowledgments
- CONFERENCE COMMITTEE
- Contents
- Understanding Asteroid Regolith Properties Using Solar System Dust Bands
- A. J. Espy Kehoe, T. J. J. Kehoe, and J. E. Colwell Tests on the Thermal Conductivity of Regolith Quasi-Analogues at Different Porosities
- A. Becker and C. Vrettos Detecting Loose Regolith in Lunar Craters Using Thermal Imaging
- Christopher Cunningham, William Whittaker, and Issa Nesnas Insights into Asteroid Surface Conditions from Spacecraft Observations, Meteorites, and Microgravity Experiments
- D. W. Sears Optical Extinction Measurements of Dust Density in the GMRO Regolith Test Bin
- J. E. Lane, J. G. Mantovani, R. P. Mueller, M. W. Nugent, A. J. Nick, J. M. Schuler, and I. I. Townsend An Automated Tracking Method to Study Particle Motion in Microgravity
- Jessica Metzger, Julie Brisset, Joshua E. Colwell, and Adrienne R. Dove Rocket Exhaust Blowing Soil in Near Vacuum Conditions Is Faster than Predicted by Continuum Scaling Laws
- Philip T. Metzger Regolith Instability Caused by Gas Diffusion: A Case Study of the Asteroid Redirect Mission
- Wesley A. Chambers and Philip T. Metzger A Combined Experimental and Numerical Approach to Understanding Impacts Involving Regolith on Planetary Surfaces
- Adrienne Dove, Yanjie Li, Joshua Colwell, Jennifer Curtis, and Christopher Barsoum Low-Velocity Impacts into Regolith under Microgravity Conditions
- J. Colwell, J. Brisset, A. Dove, A. Whizin, H. Nagler, N. Brown, A. Rascon, Brightwell, and L. Seward Results of the 2015 Workshop on Asteroid Simulants
- Philip T. Metzger, Daniel T. Britt, Stephen D. Covey, and John S. Lewis Manufactured Porous Ambient Surface Simulants
- Simulating the Surface Morphology of a Carbonaceous Chondrite Asteroid
- S. D. Covey, J. S. Lewis, P. T. Metzger, D. T. Britt, and S. E. Wiggins Axial-Torsional Interface Shear Studies Using GRC-3 Lunar Simulant and Textured Penetrometer Sleeves
- J. D. Frost and A. Martinez Particle Flow Physics Modeling for Extreme Environments
- Ranjan S. Mehta, Peter A. Liever, J. Louis Salmon, Kevin E. Buettner, and Jennifer S. Curtis Soil Modeling for InSight’s HP3-Mole: From Highly Accurate Particle-Based towards Fast Empirical Models
- Roy Lichtenheldt and Olaf Krömer Modelling the Flow Behaviour of Granular Media through the Dosing Station of a Spacecraft under Low Gravitational Environments
- S. J. Antony, B. Arowosola, L. Richter, T. Amanbayev, and T. Barakat Design of an Excavation Robot: Regolith Advanced Surface Systems Operations Robot (RASSOR) 2.0
- Robert P. Mueller, Jonathan D. Smith, Jason M. Schuler, Andrew J. Nick, Nathan J. Gelino, Kurt W. Leucht, Ivan I. Townsend, and Adam G. Dokos Ultrasonic Penetration of Granular Materials in Varying Gravity
- David Firstbrook, Kevin Worrall, Philip Doherty, Ryan Timoney, Patrick Harkness, and Francesc Suñol Characterization of Cohesive Mars Analog Soils before and after Drilling
- A. Davé, D. Bergman, K. Zacny, J. Rask, B. Glass, G. Paulsen, B. Mellerowicz, C. McKay, and Thomas Bristow Digging on Asteroids: A Laboratory Model of Granular Dynamics in Microgravity
- Jonathan E. Kollmer, Scott M. Lindauer, and Karen E. Daniels Modeling Dynamics of Counter-Rotating Bucket Drum Excavation for In Situ Resource Utilization (ISRU) in Low-Gravity Environments
- David C. Dickson, Laurent Sibille, Greg M. Galloway, Robert P. Mueller, Jonathan D. Smith, James G. Mantovani, and Sam Schreiner Filter Media Tests under Simulated Martian Atmospheric Conditions
- Juan H. Agui Exploration and Utilization of Extra-Terrestrial Bodies Push-and-Twist Drillstring Assemblies
- Testing of Soft Regolith Dynamic Anchors for Celestial Exploration
- T. Ebert and P. Larochelle Challenges in Auger-Based Sample Delivery for Planetary Missions: Contamination Paths, Mixing, and Dilution of Drilled Samples
- A. Davé, A. Davila, D. Bergman, K. Zacny, H. Smith, B. Glass, B. Yaggi, and J. Rask Development of a Planetary Deep Drill
- K. Zacny, M. Shara, G. Paulsen, B. Mellerowicz, J. Spring, A. Ridilla, H. Nguyen, K. Ridilla, M. Hedlund, R. Sharpe, J. Bowsher, N. Hoisington, S. Gorevan, J. Abrashkin, Lou Cubrich, and Mark Reichenbach The Auto-Gopher—A Wireline Rotary-Percussive Deep Sampler
- Yoseph Bar-Cohen, Kris Zacny, Mircea Badescu, Hyeong Jae Lee, Stewart Sherrit, Xiaoqi Bao, Gale L. Paulsen, and Luther Beegle Resource Prospector Instrumentation for Lunar Volatiles Prospecting, Sample Acquisition, and Processing
- J. Captain, R. Elphic, A. Colaprete, Kris Zacny, and A. Paz Lunar Rover TRL-6 Drivetrain Development
- Peter Visscher, Perry Edmundson, Nadeem Ghafoor, and Howard Jones Development and Testing of the Lunar Resource Prospector Drill (RPD
- G. Paulsen, K. Zacny, B. Yaggi, A. Wang, C. Hyman, M. Hedlund, B. Mellerowicz, J. Quinn, and J. Smith Launch Lock Mechanism for a Resource Prospector Rover
- Gabor J. Tamasy, Jonathan D. Smith, and Robert P. Mueller Towards Mobile 3D Printing for Planetary Construction
- Shawn Bulger and Krzysztof Skonieczny NASA Centennial Challenge: Three Dimensional (3D) Printed Habitat
- Monsi C. Roman, Eric A. Eberly, Robert P. Mueller, and Scott Deutsch Autonomous Additive Construction on Mars
- Samuel Wilkinson, Josef Musil, Jan Dierckx, Irene Gallou, and Xavier de Kestelier Automated Additive Construction (AAC) for Earth and Space Using In Situ Resources
- Planetary Volatiles Extractor (PVEx) for In Situ Resource Utilization (ISRU
- K. Zacny, K. Luczek, A. Paz, and M. Hedlund Helium Implantation into JSC-1A Lunar Regolith Simulant for Testing Volatile Extraction Technologies
- A. D. S. Olson, G. L. Kulcinski, J. F. Santarius, and J. G. Mantovani Effect of Angle of Attack on Slope Climbing Performance
- Colin Creager, Lucas Jones, and Lauren Smith Dust Tolerant Automated Umbilical (DTAU
- Concept for a Fully In Situ Resource-Derived Habitat for Martian Environment
- Lucas Meza, Russell Singer, Noel Vazquez, Ryan Keenan, Hayden Burgoyne, Kristina Hogstrom, and Wei-Lin Tan Some Strategic Considerations Related to the Potential Use of Water Resource Deposits on Mars by Future Human Explorers
- D. W. Beaty, R. P. Mueller, D. B. Bussey, R. M. Davis, L. E. Hays, S. J. Hoffman, and E. Zbinden Mars Atmospheric In Situ Resource Utilization Projects at the Kennedy Space Center
- A. C. Muscatello, P. E. Hintze, A. J. Meier, J. A. Bayliss, L. J. Karr, M. S. Paley, M. J. Marone, T. L. Gibson, J. M. Surma, J. M. Mansell, G. M. Lunn, R. W. Devor, J. G. Captain, and M. Berggren Analysis of Thermal/Water Propulsion for CubeSats that Refuel in Space
- Philip T. Metzger, Kris Zacny, Kathryn Luczek, and Magnus Hedlund Icebreaker-3 Drill Integration and Testing at Two Mars-Analog Sites
- B. Glass, D. Bergman, B. Yaggi, A. Dave, and K. Zacny Autonomous Structural Health Monitoring Techniques for the Icebreaker Drill
- D. Bergman, B. Glass, T. Stucky, K. Zacny, G. Paulsen, and C. McKay Optical Mining Subscale Testing
- Christopher B. Dreyer, Joel Sercel, Leslie Gertsch, Alex Lampe, Travis J. Canney, and Angel Abbud-Madrid A Coordinated Research Program to Develop the Technology to Optical Mine Asteroids
- Joel C. Sercel, Christopher B. Dreyer, Angel Abbud-Madrid, Daniel Britt, Robert Jedicke, Leslie Gertsch, and Stanley G. Love An Electromagnetic Asteroid Regolith Excavator—Preliminary Results
- Martian Atmospheric Dust Mitigation for ISRU Intakes via Electrostatic Precipitation
- James R. Phillips III, Jacob R. S. Pollard, Michael R. Johansen, Paul J. Mackey, J. Sid Clements, and Carlos I. Calle Electrodynamic Dust Shield for Space Applications
- Paul J. Mackey, Michael R. Johansen, Robert C. Olsen, Matthew G. Raines, James R. Phillips III, Rachel E. Cox, Michael D. Hogue, Jacob R. S. Pollard, and Carlos I. Calle An Introduction to AIT Requirements for Lunar Systems and Structures
- Alexander M. Jablonski and Daniel Showalter ATHLETE as a Mobile ISRU and Regolith Construction Platform
- A. Scott Howe, Brian Wilcox, Martin Barmatz, and Gerald Voecks A Carbonaceous Chondrite Based Simulant of Phobos
- D. Rickman, M. R. Patel, V. K. Pearson, S. Wilson, and J. Edmunson Regolith Extraction, Storage, and Transfer under Micro-Gravity
- O. R. Walton, H. J. Vollmer, B. J. Vollmer, and L. K. Figueroa Free-Flying Robotic System for Interplanetary Prospecting and In Situ Resource Utilization
- Andres E. Perez, Hever Moncayo, Richard J. Prazenica, Zachery Kern, Kris Zacny, Robert P. Mueller, Tom Ebert, and Michael DuPuis Addressing Exploration and ISRU Safety Challenges for Volatile Rich Asteroids
- D. T. Britt and E. Beltran LIRA LIBS for Stand-Off Planetary and Asteroid Resource Prospecting
- Vincent Latendresse, Roman V. Kruzelecky, Piotr Murzionak, Jonathan Lavoie, Elad Wallach, Alireza Nakhaei, Ian Sinclair, Wes Jamroz, Edward Cloutis, Pierre Cottin, and Michel Doucet Basalt Materials and Technologies for Vertical Take Off, Vertical Landing (VTVL) Rocket Pads
- Robert P. Mueller, Steven Trigwell, and Ivan I. Townsend Design, Test, and Simulation of Lunar and Mars Landing Pad Soil Stabilization Built with In Situ Rock Utilization
- Paul J. van Susante and Philip T. Metzger Planetary Basalt Field Project: Construction of a Lunar Launch/Landing Pad, PISCES and NASA Kennedy Space Center Project Update
- The Role of Space Settlement Research in Development of Environmentally Sustainable Technology
- Thomas L. Matula, and Kevin Greene The Ant and the Trap: Evolution of Ant-Inspired Obstacle Avoidance in a Multi-Agent Robotic System
- Karl A. Stolleis, Joshua P. Hecker, and Melanie E. Moses Evolving Autonomous Charging Behavior in a Robot Swarm
- Karl A. Stolleis, Joshua P. Hecker, Gilbert Montague, Kurt Leucht, and Melanie E. Moses Extraterrestrial Regolith Derived Atmospheric Entry Heat Shields
- Michael D. Hogue, Robert P. Mueller, Laurent Sibille, Paul E. Hintze, and Daniel J. Rasky How to Build a Self-Replicating Machine on the Moon
- A. A. Ellery Plasma Drill for Mars Exploration
- C. Hoftun, B. W. Johansen, K. Naesje, P. S. Adl, D. Paulsen, R. Valen, B. S. Dalen, P. Lee, B. Glass, C. P. McKay, K. Zacny, S. Vijendran, P. A. Amundsen, G. Pattarini, S. Mohamad, and F. Wabakken Impact and Dynamic Analysis of an Ultrasonic Percussive Drill for Aerospace Applications
- Ramesh B. Malla and Luis J. Vila Advanced Materials and Designs for Hydraulic, Earth, and Aerospace Structures Izod Impact Testing of Carbon Nanotube-Reinforced Woven Composites Enabled by the PopTube Approach
- William E. Guin, Jialai Wang, and Xinyu Zhang Buckling of Doubly Curved and Imperfect Composite Shells Subjected to External Pressure
- J. Blachut Analysis and Characterization of Damage Utilizing an Orthotropic Generalized Composite Material Model Suitable for Use in Impact Problems
- Robert K. Goldberg, Kelly S. Carney, Paul DuBois, Canio Hoffarth, Subramaniam Rajan, and Gunther Blankenhorn Three-Phase Statistically Equivalent Periodic Unit Cells for Protein-Bound Soils
- I. Rosa, H. Roedel, M. D. Lepech, D. J. Loftus and E. J. Garboczi Carbon Fiber-Based Structural Electric Capacitors: Coupled Mechanical-Electrical Behavior and Effect of Interlaminar Damage
- Sensing Temperature and Stress Distributions on Rock Samples under Mechanical Loading
- S. J. Antony, A. Olugbenga, N. Ozerkan, O. Marumoame, and G. Okeke Analysis and Study on the Cause of the Dam Abutment Crack of CFRD
- Baiyun Huang, Liqun Xu, and Zhenzhong Shen Prediction of the Ultimate Aseismatic Capacity of Zhen’an Concrete Face Rock-Fill Dam at a Gradient Valley
- Zhenzhong Shen, Liting Qiu, and Yiqi Zhou Stability Analysis of Underground Openings in Discontinuous Rock Masses Using Multibody Finite Element Method
- Chao Su, Yebin Zhao, and Chao Xu Simulation for Construction of Mass Concrete on Soft Foundation with Consideration of Consolidation Behavior
- Chao Xu and Chao Su Thermo-Mechanical Behavior of a Novel Functionally Graded Material Panel
- Fangliang Chen, Qiliang Lin, and Huiming Yin A Numerical Model to Study the Effect of Alumina Tri-Hydrate on Mechanical Properties of Fiber Reinforced Polymers
- Mostafa Yossef and An Chen Strain Effect on the Performance of Solar Cells
- Mostafa Yossef and An Chen The Effects of UV Aging on the Cracking of Titanium Oxide Layer on Poly (Ethylene Terephthalate) Substrate
- Chao Zhang, Fangliang Chen, Matthew H. Gray, Robert Tirawat, and Ross E. Larsen Buckling and Post-Buckling Analysis of Restrained Composite Laminated Plates
- Qingyuan Chen and Pizhong Qiao Lamb Wave-Based Delamination Detection of Laminated Composite Plates by a Network of Hexagonal Sensor Arrays
- Binghong Chen and Pizhong Qiao Permeability of Sulfur Based Lunar Concrete
- J. M. Osio-Norgaard and Christopher C. Ferraro Visual Simulation Approach on Rheology of Ordinary Concrete
- Ce Bian, Zhenghong Tian, Xuhang Li, and Jian Xiang Properties of Manufactured Sand Mortar Based on Compressible Packing Model
- 3D Geospatial Function Monitoring Model of Arc Dam Deformation Based on the Improvement of Temperature Component
- Jianchun Qiu, Dongjian Zheng, Bo Chen, and Yanxin Xu Diagnosis of Abnormal Structural Vibration for Xiaoshunjiang Pumping Station
- Yanxin Xu, Chenfei Shao, Dongjian Zheng, and Jianchun Qiu Stability Analysis of Rock Slope with Cracks Based on XFEM
- Liting Qiu, Zhenzhong Shen, and Kunming Dong Structures in Challenging Environments: Dynamics, Controls, Smart Structures, Health Monitoring, and Sensors Launch Pad in a Box
- J. G. Mantovani, G. J. Tamasy, R. P. Mueller, I. I. Townsend, J. W. Sampson, and M. A. Lane Airplane Off-Ground Advisory System (OGAS
- Sunil Jinadasa and Keith Herbert Modeling and Control of Cold Gas Propulsion for Spacecraft Attitude Control
- S. J. Kitchen-McKinley, S. V. Drakunov, R. P. Mueller, and M. A. Dupuis Detection of Bond Slip Failure in a Concrete-Encased Composite Structure Using Shear Mode Based Piezoceramic Transducers
- Qingzhao Kong, Lei Zeng, Kai Xu, Naixin Zheng, and Gangbing Song Damage Identification of Shear Buildings Using Natural Frequency-Change Square Ratio Vector Based on Improved Restoring Force Technology
- Yabin Liang, Dongsheng Li, and Gangbing Song Detection of the Secondary Pouring Interface in Concrete Structure Using Piezoceramic Based Smart Aggregates
- Qian Feng, Yunsheng Yao, Jiang Huang, Qingzhao Kong, and Gangbing Song Develop a Remote PID Motor Control Experiment for Engineering Technology Education–A Case Study
- Junxiao Zhu, Ning Wang, Qianlong Lan, Gangbing Song, Xuemin Chen, and Hamid Parsaei Develop a Collaborative and Cooperative Remote Experiment
- Qianlong Lan, Ning Wang, Junxiao Zhu, Xuemin Chen, Gangbing Song, and Hamid Parsaei Structural Health Monitoring of Plate-Like Structures Using Compressive/Shear Modes of Piezoelectric Transducers
- Seyed Mohammad Parvasi, Qing Ji, and Gangbing Song Design and Application of Structural Health Monitoring System for Dalian Gymnasium
- Study of Dynamic and Static Response of an Old Truss Railroad Bridge
- Ramesh B. Malla, Surendra Baniya, and David Jacobs Water Filled Crack Detection for Concrete Structures Using PZT Wave-Based Method
- S. Yan, W. S. Mu, and J. Chen Spray Deposition Modeling of Carbon Nano-Inks for Structural Health Monitoring
- Xin Wang, John Sparkman, and Jihua Gou Stress Wave Propagation Simulation for the Interface Debonding Detection of Concrete-Filled Steel Tubular with Spectral Element Method
- B. Xu, L. Luan, H. Chen, and G. Monti Concrete Mechanical Performance Detection Using NDT Technology
- S. Yan, J. Chen, W. Sun, and W. S. Mu Fuzzy Control of Semi-Active Base-Isolated Structure against Chi-Chi Earthquake
- D. H. Zhao, H. N. Li, Y. X. Li, H. Qian, and B. X. Qi An Active Deployable Tensegrity-Ring Footbridge System
- N. Veuve, L. Rhode-Barbarigos, and I. F. C. Smith Application of the Pounding Tuned Mass Damper to a Submerged Jumper Experiencing Horizontal and Vertical Vibrations
- J. Kelly Allen, Devendra Patil, Siu Chun Michael Ho, Rachel Hirsch, Peng Zhang, Seyed Mohammed Parvasi, and Gangbing Song Effects of Fluid-Structure Interaction on Dynamic Response of High-Rise Intake Towers
- Hanyun Zhang and Liaojun Zhang Analysis of Anti-Blast Performance of Lightweight Steel Columns Subjected to Elevated Temperatures [Go to Page]