eLibrary >
BS EN 15269-2:2024 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Fire resistance of hinged and pivoted steel doorsets >
BS EN 15269-2:2024 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Fire resistance of hinged and pivoted steel doorsets, 2025
- undefined
- European foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- Figure 2 — Faces and sides of a door leaf
- 4 Determination of the field of extended application [Go to Page]
- 5 Extended application report
- 6 Classification report
- Annex A (normative) Construction parameter variations
- A.1 General
- A.2 Guideline for the evaluation of the required orientation of the test specimens (only for doorsets that are required to be tested from both directions)
- Table A.1 — Construction parameter variations — Section A — Door leaf
- Table A.2 — Construction parameter variations — Section B — Door frame
- Table A.3 — Construction parameter variations — Section C — Items of building hardware
- Table A.4 — Construction parameter variations — Section D — Support/attachment — door leaf to framing
- Table A.5 — Construction parameter variations — Section E — Side/transom panels and flush overpanels
- Table A.6 — Construction parameter variations — Section F — Glazing for door leaf/leaves or side/transom and flush overpanels
- Table A.7 — Construction parameter variations — Section G — Supporting construction and attachment (technique) of door frame or side/transom panels/flush overpanels
- Table A.1.19 — Latched condition for single and double leaf doorsets
- Table B.2.6 — Possible frame infill materials
- Table C.8.4 — Alternative fitting positions of Face fixed door closers / power operated opening devices
- Table F.1.3 — Glazing — Transposition between leaves
- Table F.1.4 — Glazing — Size variation between smallest and largest tested glazing
- Figure A.1 — Number of leaves
- Figure A.2 — Number of vertical panels per leaf
- Figure A.3 — Intumescent seals between frame and door leaf/leaves — Location towards the frame rebate
- Figure A.4 — Intumescent seals between frame and door leaf/leaves — Location away from the frame rebate
- Figure A.5 — Non-intumescent seals between frame and door leaf/leaves — Reaction to fire class A1, (fitted in leaf or frame) — Location
- Figure A.6 — Non-intumescent seals between frame and door leaf/leaves — < Reaction to fire class A1, (fitted in leaf or frame) — Location
- Figure A.7 — Non-intumescent seals between frame and door leaf/leaves — Reaction to fire class A1, (fitted in leaf or frame) — Add
- Figure A.8 — Non-intumescent seals between frame and door leaf/leaves — Reaction to fire class A1, (fitted in leaf or frame) — Remove
- Figure A.9 — Non-intumescent seals between frame and door leaf/leaves — < Reaction to fire class A1, (fitted in leaf or frame) — Add
- Figure A.10 — Non intumescent seals between frame and door leaf / leaves — < Reaction to fire class A1, (fitted in leaf or frame) — Remove
- Figure A.11 — Air transfer grilles (ventilation grilles/louvres)
- Figure A.12 — Air transfer grilles (ventilation grilles/louvres) — Change location in horizontal direction
- Figure A.13 — Air transfer grilles (ventilation grilles/louvres)
- Figure A.14 — Rebate — Add
- Figure A.15 — Rebate (door leaves to frames) — Remove
- Figure A.16 — Thickness of core material — Increase
- Figure A.17 — Thickness of core material — Decrease
- Figure A.18 — Pattern of core material - Increase number of pieces (two examples shown)
- Figure A.19 — Pattern of core material — Decrease number of pieces
- Figure A.20— Number of layers of identical and/or different materials — Increase
- Figure A.21 — Number of layers of identical and/or different materials — Decrease
- Figure A.22 — Metal armour sheet (internally mounted)
- Figure A.23 — Electronic security mesh
- Figure A.24 — Cross-section dimension of stiffening elements
- Figure A.25 — Number of intermediate stiffening elements
- Figure A.26 — Stiffening elements — Location
- Figure A.27 — Number of stiffening element fixing points
- Figure A.28 — Overlap dimension of leaf/panel edge rebate
- Figure A.29 — Overlap dimension of leaf/panel edge rebate
- Figure A.30 — Additional overlapping edge at the bottom of the door leaf
- Figure A.31 — Leaf edge detail — Shape
- Figure A.32 — Jointing/assembly technique – Alternative (welding/riveting/screwing)
- Figure A.33 — Dimension of intumescent seals (leaf or frame fitted)
- Figure A.34 — Dimension of non-intumescent seals (Reaction to fire class A1) — leaf or frame fitted
- Figure A.35 — Dimension of non-intumescent seals (
- Figure A.36 — Decorative laminates and timber veneers on the face (on leaf or frame) — Add
- Figure A.37 — Decorative laminates and timber veneers on the face (on leaf or frame) — Remove
- Figure A.38 — Decorative laminates and timber veneers on the edges (on leaf or frame) — Add
- Figure A.39 — Decorative laminates and timber veneers on the edges (on leaf or frame) — Remove
- Figure A.40 — Protective elements (e.g. push plates, kick plates and bumpers) — Face fixed — Add
- Figure A.41 — Mouldings/profiles — Add/Remove
- Figure A.42 — Height of hatch door frame above floor — Variation
- Figure A.43 — Overall dimensions and shape — Increase
- Figure A.44 — Overall dimensions and shape — Decrease
- Figure A.45 — Thickness of metal
- Figure A.46 — Number of latches/locks/strike plates — Increase
- Figure A.47 — Number of latches/locks/strike plates — Decrease
- Figure A.48 — Vertical position of single latch/lock
- Figure A.49 — Vertical position of multiple latches/locks (with or without connecting rods)
- Figure A.50 — Latches/locks — Alternative type
- Figure A.53 — Bolts (flush, internal and surface mounted) — Add
- Figure A.54 — Number of hinges or spring hinges/dog bolts
- Figure A.55 —Hinges — Alternative type
- Figure A.56 — Dog bolts — Alternative type
- Figure A.59 — Distances between top and bottom hinges and intermediate dog bolts / movement restrictors — Increase/Decrease
- Figure A.60 — Face fixed door closers / Power operated opening devices (drives)— Alternative fitting positions
- Figure A.61 — Concealed head and bottom mounted door closers — Alternative type (change concealed for face mounted)
- Figure A.62 — Face fixed door closers — Alternative type (change face mounted for concealed)
- Figure A.63 — Cables and related accessories (e.g. cable transfer devices, cable loops, protective conduits) - fitted in or on the door leaf or frame — Add
- Figure A.64 — Door viewer (spy hole) - mechanical or electronic/key tubes (access port within doorset for key retrieval) - mortised/concealed — Add
- Figure A.65 — Size (area, width, height)— Increase
- Figure A.66 — Thickness of glass
- Figure A.67 — Dimensions of each glazing — Increase
- Figure A.68 — Dimensions in each glazing — Decrease
- Figure A.69 — Decorative capping, edge cover — Add or exchange
- Figure A.70 — Number of glazed apertures — Increase
- Figure A.71 — Number of glazed apertures — Decrease
- Figure A.74 — Distance between glazed apertures — Decrease
- Figure A.75 — Fixing to floor
- Figure A.78 — Standard flexible supporting construction — Strengthening
- Figure A.79 — Overlap (rebate / astragal) between door leaves and frame or between meeting edges — Decrease overlap thickness
- Figure A.80 — Overlap (rebate / astragal) between door leaves and frame or between meeting edges — Increase overlap thickness
- Figure A.81 — Door closers
- Figure A.82 — Single and double acting
- Figure A.83 — Face mounted finger protection device — Add / Remove
- Figure A.84 — Edge mounted finger protection device — Add / Remove
- Figure A.85 — Internally mounted reinforcement for face fixed components — Change location
- Figure A.86 — Sealant between door frame and supporting construction — Add
- Figure A.87 — Sealant between door frame and supporting construction — Remove
- Annex B (normative) Arrangements for doorsets incorporating side and/or overpanels
- Table B.1 — Permissible variations for panel arrangements with transom panels
- Table B.2 — Permissible variations for panel arrangements with flush overpanels
- Figure B.2 — Side/flush overpanel arrangement
- Bibliography [Go to Page]