eLibrary >
BS EN ISO 13803:2014 Paints and varnishes. Determination of haze on paint films at 20 degrees >
BS EN ISO 13803:2014 Paints and varnishes. Determination of haze on paint films at 20 degrees, 2014
- Contents Page
- Foreword
- Section sec_1
- Section sec_2
- Section sec_3
- Section sec_3.1
- Section sec_3.2
- Section sec_3.3
- Section sec_4
- Section sec_5
- Section sec_5.1
- Section sec_5.1.1
- Table tab_a
- Figure fig_1
- Section sec_5.1.2
- Table tab_b
- Figure fig_2
- Table tab_c
- Figure fig_3
- Section sec_5.1.3
- Table tab_1
- Section sec_5.2
- Section sec_5.2.1
- Section sec_5.2.2
- Section sec_5.2.3
- Section sec_6
- Section sec_6.1
- Section sec_6.2
- Section sec_6.3
- Section sec_6.4
- Section sec_7
- Section sec_7.1
- Section sec_7.2
- Section sec_7.3
- Section sec_8
- Section sec_8.1
- Section sec_8.2
- Section sec_8.3
- Section sec_9
- Section sec_9.1
- Section sec_9.2
- Section sec_9.3
- Section sec_10
- Annex sec_A
- Reference ref_1
- Reference ref_2
- Reference ref_3
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principle
- 5 Apparatus and materials
- 5.1 Hazemeter
- 5.2 Measurement standards (certified reference material, working measurement standards)
- 6 Test panels
- 6.1 Substrate
- 6.2 Preparation and coating
- 6.3 Drying and conditioning
- 6.4 Thickness of coating
- 7 Calibration and adjustment of the hazemeter
- 7.1 Preparation of the apparatus
- 7.2 Zero point check
- 7.3 Calibration and adjustment
- 8 Procedure
- 8.1 General
- 8.2 Haze measurement of coatings from liquid paints and powder coating materials on glass plates
- 8.3 Haze measurement on other coated dry substrates
- 9 Precision
- 9.1 General
- 9.2 Repeatability limit r
- 9.3 Reproducibility limit R
- 10 Test report
- Annex A (normative) Calculation of linear haze
- Bibliography [Go to Page]