eLibrary >
PD CEN/TR 12872:2014 Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs >
PD CEN/TR 12872:2014 Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs, 2014
- Contents Page
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Information on product performance
- 5 Inspection at site
- 6 Transport and delivery
- 7 Handling
- 8 Stacking
- Figure 1 — Panel storage
- Figure 2 — Correct method of edge stacking
- 9 Storage
- 10 Moisture content, conditioning and the effects of moisture [Go to Page]
- Table 1 — Equilibrium moisture content and conditions of use [Go to Page]
- Table 2 — Dimensional change for a 1 % change in panel moisture content [Go to Page]
- Figure 3 — Panels stacked with battens
- 11 Cutting and machining [Go to Page]
- Figure 4 — Sawing wood based panels [Go to Page]
- 12 Fixing
- Table 3 — Maximum spacings and minimum edge distance of fixings
- 13 Floors — Selection and installation [Go to Page]
- Figure 8 — Minimum edge nailing distance
- 14 Walls — Selection and installation [Go to Page]
- Figure 9 —Basic example of a timber frame external wall construction [Go to Page]
- Figure 10 — Basic example of sheathing board fixing
- Figure 11 — Minimum edge nailing distance
- 15 Roofs — Selection and installation [Go to Page]
- Figure 16 — Ventilation of “room in the roof” with sloping ceiling and insulation between the rafters [Go to Page]
- Figure 20 — Minimum edge nailing distance
- Bibliography [Go to Page]