ASTM B161-05e1
Historical Standard: ASTM B161-05e1 Standard Specification for Nickel Seamless Pipe and Tube
SUPERSEDED (see Active link, below)
ASTM B161
1. Scope
1.1 This specification covers nickel (UNS N02200)* and low-carbon nickel (UNS N02201)* in the form of cold-worked seamless pipe and tube in the conditions shown in Table 1 and Table X1.1.
1.1.1 Hot-worked material is available. Properties are to be agreed upon between the manufacturer and purchaser.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations.
TABLE 1 Mechanical Properties
| Condition and Size | Tensile Strength, min, psi (MPa) | Yield Strength (0.2 % offset), min, psi (MPa) |
Elongation in 2 in. or 50 mm (or 4 D ), min, % |
|||
|---|---|---|---|---|---|---|
| Nickel (UNS N02200) |
Low-Carbon Nickel (UNS N02201) |
Nickel (UNS N02200) |
Low-Carbon Nickel (UNS N02201) |
Nickel (UNS N02200) |
Low-Carbon Nickel (UNS N02201) |
|
| Annealed: | ||||||
|
5 in. (127 mm) and under outside diameter |
55 000 (380) | 50 000 (345) | 15 000 (105) | 12 000 (80) | 35 | 35 |
|
Over 5 in. (127 mm) in outside diameter |
55 000 (380) | 50 000 (345) | 12 000 (80) | 10 000 (70) | 40 | 40 |
| Stress-Relieved: | ||||||
| All sizes | 65 000 (450) | 60 000 (415) | 40 000 (275) | 30 000 (205) | 15 | 15 |
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
B829 Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
Keywords
seamless pipe; seamless tube; N02200; N02201; Nickel alloy pipe--specifications; Nickel alloy tube--specifications; Seamless Ni alloy pipe--specifications; Seamless Ni alloy tube--specifications; UNS N02200 (commercially pure Ni alloy, Nickel 200); UNS N02201 (commercially pure Ni alloy, Nickel 201); Nickel alloy pipe--specifications; Nickel alloy tube--specifications; Seamless Ni alloy pipe--specifications; Seamless Ni alloy tube--specifications; UNS N02200 (commercially pure Ni alloy, Nickel 200); UNS N02201 (commercially pure Ni alloy, Nickel 201);
ICS Code
ICS Number Code 77.150.40 (Nickel and chromium products)
DOI: 10.1520/B0161-05E01
ASTM International is a member of CrossRef.
