Significance and Use

Knowledge of the phosphorus content, and thus the phosphorus-containing additives, in a lubricating oil or additive can be used to predict performance characteristics. This test method is suitable for most applications requiring the determination of phosphorus.

1. Scope

1.1 These test methods cover the determination of phosphorus in unused lubricating oils and lubricating oil additives and their concentrates. The test methods are not restricted with respect to the type of phosphorus compounds that may be present for example, trivalent or pentavalent phosphorus compounds, phosphines, phosphates, phosphonates, phosphorus sulfides, and so forth since all are quantitatively converted to an aqueous solution of orthophosphate ion by oxidation of the sample during the course of analysis.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

7.1 This test method covers a procedure for removal of organic material and subsequent conversion of phosphorus to phosphate ion in samples of unused lubricating oils, lubricating oil additives, and their concentrates.

12.1 This test method covers determination of total phosphorus in concentrations of less than two mass % (see Note 6), calculated on the basis of the original test specimen, in samples treated by the acid-oxidation procedure described in Sections 7-11.

Note 6For phosphorus concentrations greater than or equal to two mass %, see Sections 19-25.

19.1 This test method covers the determination of total phosphorus in concentrations of 2 mass % or more, (see Note 10), calculated on the basis of the original sample, in samples treated by the acid-oxidation procedure described in Sections 7-11.

Note 10For phosphorus concentrations less than 2 mass %, see Sections 12-18.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D1193 Specification for Reagent Water

D4057 Practice for Manual Sampling of Petroleum and Petroleum Products

D4177 Practice for Automatic Sampling of Petroleum and Petroleum Products

D6299 Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

Keywords

additives; gravimetric; lubricating oils; phosphorus; photometric; Additives--petroleum products; Gravimetric determination; Lubricating oils; Phosphorus content--petroleum products; Quality control (QC)--petroleum products/applications;

ICS Code

ICS Number Code 75.100 (Lubricants, industrial oils and related products)

DOI: 10.1520/D1091-11

ASTM International is a member of CrossRef.

ASTM D1091