ASTM D3374-99
Historical Standard: ASTM D3374-99 Standard Specification for Vinyl-Coated Glass Yarns
SUPERSEDED (see Active link, below)
ASTM D3374
1. Scope
1.1 This specification covers vinyl-coated glass yarns. These yarns are manufactured in two basic classes. These classes have been established that when properly woven into screening, satisfactory strength, durability, and insect protection are obtained. The two classes are as follows:
1.1.1 Class 1 -Nominal thickness 0.292 mm (0.0115 in.).
1.1.2 Class 2 -Nominal thickness 0.330 mm (0.0130 in.).
1.2 This specification shows the values in both SI units and inch-pound units. 'SI units' is the technically correct name for a system of metric units known as the International System of Units. 'Inch-pound units' is the technically correct name for the customary units used in the United States. The values stated in inch-pound units are to be regarded as the standard. The values in SI units are provided for information only.
1.3 The following precautionary statement pertains only to the test method portions, Sections 12 through 21, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
Federal Standard
CCC-D-950 Specification, Dyeing and After Treating Processes for Cotton Cloths Available from General Services Administration, Specification and Consumer Information Distribution Section (WFSIS), Washington Navy Yard, Bldg. 197, Washington, DC 20407.ASTM Standards
D123 Terminology Relating to Textiles
D578 Specification for Glass Fiber Strands
D1907 Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
D2256 Test Method for Tensile Properties of Yarns by the Single-Strand Method
D4963 Test Method for Ignition Loss of Glass Strands and Fabrics
D7018 Terminology Relating to Glass Fiber and Its Products
ANSI/ASQC Standards
ANSI/ASQC Z1.9 Sampling Procedures and Tables for Inspection by Variables for Percent NonconformingAATCC Standard
Evaluation Procedure Gray Scale for Color Change Available from American Association of Textile Chemists and Colorists, P.O. Box 12215, Research Triangle Park, NC 27709.Keywords
appearance; breaking force; color; colorfastness; flexibility; ignition loss; thickness; vinyl-coated glass yarns; yarn number; Appearance of textile materials/applications; Breaking strength/tenacity textile fabrics/fibers; Colorfastness; Flexibility textile materials/applications; Glass fabrics/fibers/textile products specifications; Ignition textile materials/products; Loss on ignition (LOI); Textile fabrics/fibers specifications; Vinyl-coated glass yarns; Yards per pound; Yarn number;
ICS Code
ICS Number Code 59.080.40 (Coated fabr)
DOI: 10.1520/D3374-99
ASTM International is a member of CrossRef.
