1. Scope

1.1 Four test methods to accelerate the effects of long term indoor illumination on artists' paints are described as follows:

1.1.1 Test Method AExposure to natural daylight filtered through glass,

1.1.2 Test Method BExposure to irradiance from daylight fluorescent lamps,

1.1.3 Test Method CExposure in xenon-arc irradiance simulating daylight filtered through glass, and

1.1.4 Test Method DExposure to irradiance from cool white fluorescent lamps and soda-lime glass filtered fluorescent UV sunlamps.

1.2 These test methods are used to approximate the color change that can be expected over time in pigments used in artists' paints in normal indoor exposure.

Note 1The color changes that result from accelerated exposure may not duplicate the results of normal indoor exposure in a home or gallery. The relative resistance to change, however, can be established so pigments can be assigned to categories of relative lightfastness.

1.3 Lightfastness categories are established to which pigments are assigned based on the color difference between specimens before and after exposure.

1.4 Color difference units are calculated by the CIE 1976 L*a*b* color difference equation.

1.5 These test methods apply to artists' oil, resin-oil, acrylic emulsion, alkyd, watercolor paints, and gouache paints.

1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.7 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D2244 Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

D4302 Specification for Artists Oil, Resin-Oil, and Alkyd Paints

D4674 Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments

D5067 Specification for Artists Watercolor Paints

D5098 Specification for Artists Acrylic Dispersion Paints

D5724 Specification for Gouache Paints

D6901 Specification for Artists Colored Pencils

E284 Terminology of Appearance

E1347 Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry

E1348 Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry

E1349 Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry

G24 Practice for Conducting Exposures to Daylight Filtered Through Glass

G113 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials

G141 Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials

G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

Keywords

art materials; colorants; lightfastness; lightfastness categories; relative humidity; test specimens; window glass filtered daylight exposure; xenon arc; Artists' materials/applications; Color--lightfastness; Exposure tests--light; Light exposure; Lightfastness; Pigments (general properties); Sunlight/monochromatic light exposure; Xenon-arc light exposure;

ICS Code

ICS Number Code 87.060.10 (Pigments and extenders)

DOI: 10.1520/D4303-03

ASTM International is a member of CrossRef.