ASTM D5035-95
Historical Standard: ASTM D5035-95 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
SUPERSEDED (see Active link, below)
ASTM D5035
1. Scope
1.1 This test method covers raveled strip and cut strip test procedures for determining the breaking force and elongation of most textile fabrics. Provision is made for wet testing.
1.1.1 The raveled strip test is applicable to woven fabrics while the cut strip test is applicable to nonwoven fabrics, felted fabrics, and dipped or coated fabrics.
1.2 This test method is not recommended for knitted fabrics or for other textile fabrics which have high stretch (more than 11%).
Note 1-For the determination of the breaking force and elongation of textile fabrics using the grab test and modified grab test procedures, refer to Test Method D5034. Note 2-For determination of the breaking force and elongation of some specific types of fabrics which use the strip test, refer to Specifications D579 and D580.1.3 This test method shows the values in both inch-pound units and SI units. Inch-pound units is the technically correct name for the customary units used in the United States. SI units is the technically correct name for the system of metric units known as the International System of Units. The values stated in either acceptable metric units or in other units shall be regarded separately as standard. The values expressed in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining in any way.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D76 Specification for Tensile Testing Machines for Textiles
D123 Terminology Relating to Textiles
D579 Specification for Greige Woven Glass Fabrics
D580 Specification for Greige Woven Glass Tapes and Webbings
D629 Test Methods for Quantitative Analysis of Textiles
D1776 Practice for Conditioning and Testing Textiles
D4848 Terminology Related to Force, Deformation and Related Properties of Textiles
D4849 Terminology Related to Yarns and Fibers
D4850 Terminology Relating to Fabrics and Fabric Test Methods
D5034 Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
Keywords
breaking-strength; fabric; elongation; fabric; nonwoven-fabric; woven fabric; Strip force test; Strip test; Textile fabrics (general); Acceptance criteria/testing--textile fabrics/fibers; Breaking strength/tenacity--textile fabrics/fibers; Cut strip test; Elongation--textiles; Raveled strip test;
ICS Code
ICS Number Code 59.080.30 (Textile fabr)
DOI: 10.1520/D5035-95
ASTM International is a member of CrossRef.
