1. Scope

1.1 This guide covers test methods appropriate for evaluating a wide range of performance properties for wood-plastic composite (WPC) products. It was developed from evaluations of both experimental and currently manufactured products, and is not intended to suggest that all the tests listed are necessary or appropriate for each application of a WPC. The user must determine which test methods apply to the particular application being evaluated (see Appendix X1).

1.2 Details of manufacturing processes may be proprietary and are beyond the scope of this guide.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

C1308 Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms

D9 Terminology Relating to Wood and Wood-Based Products

D143 Test Methods for Small Clear Specimens of Timber

D792 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

D883 Terminology Relating to Plastics

D1037 Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials

D1038 Terminology Relating to Veneer and Plywood

D1413 Test Method for Wood Preservatives by Laboratory Soil-Block Cultures

D1554 Terminology Relating to Wood-Base Fiber and Particle Panel Materials

D1761 Test Methods for Mechanical Fasteners in Wood

D1929 Test Method for Determining Ignition Temperature of Plastics

D2017 Test Method of Accelerated Laboratory Test of Natural Decay Resistance of Woods

D2047 Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine

D2394 Test Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring

D2395 Test Methods for Specific Gravity of Wood and Wood-Based Materials

D2481 Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens

D2565 Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications

D2915 Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products

D3345 Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites

D4000 Classification System for Specifying Plastic Materials

D4060 Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

D4092 Terminology for Plastics: Dynamic Mechanical Properties

D4442 Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials

D4495 Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight

D4761 Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material

D5379/D5379M Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method

D5456 Specification for Evaluation of Structural Composite Lumber Products

D5764 Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products

D6109 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products

D6341 Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140F (-34.4 and 60C)

D6662 Specification for Polyolefin-Based Plastic Lumber Decking Boards

E84 Test Method for Surface Burning Characteristics of Building Materials

E108 Test Methods for Fire Tests of Roof Coverings

E661 Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads

E1354 Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

F1679 Test Method for Using a Variable Incidence Tribometer (VIT)

G154 Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials

AWPA Standards

Keywords

biodeterioration; fire performance; mechanical properties; physical properties; test methods; wood-plastic composite; Mechanical properties; Physical properties/dimensions/characteristics; Wood-plastic composite ;

ICS Code

ICS Number Code 17.040.20 (Properties of surfaces)

DOI: 10.1520/D7031-04

ASTM International is a member of CrossRef.