ASTM E2408-04
Historical Standard: ASTM E2408-04 Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes
SUPERSEDED (see Active link, below)
ASTM E2408
1. Scope
1.1 This test method covers the determination of the relative extensional viscosity or Screen Factor (SF) of dilute agricultural spray mixes.
1.2 The test can be used for tank mixes containing dissolved, emulsified or dispersed materials, or mixtures.
1.3 Results may be affected by the quality of the water used. Make-up water quality should therefore be specified in the presentation of results.
1.4 Proper safety and hygiene precautions must be taken when working with pesticide formulations to prevent skin or eye contact, vapor inhalation, and environmental contamination. Read and follow all handling instructions for the specific formulation and conduct the test in accordance with good laboratory practice.
Note 1References to the development of extensional viscosity from dissolved polymers, extensional viscosity effects on the droplet size distribution of sprays, and measurements of screen factor on recirculated spray mixes containing polymers are available.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D1193 Specification for Reagent Water
E609 Terminology Relating to Pesticides
E1116 Test Method for Emulsification Characteristics of Pesticide Emulsifiable Concentrates
CIPAC Documents
CIPACMethodMT18.1.1t (Instructions for the preparation of standard waters)Keywords
Agricultural materials/applications; Extensional viscosity; Viscosity;
ICS Code
ICS Number Code 17.060 (Measurement of volume, mass, density, viscosity)
DOI: 10.1520/E2408-04
ASTM International is a member of CrossRef.
