1. Scope

1.1 The primary objective of metallographic examinations is to reveal the constituents and structure of metals and their alloys by means of a light optical or scanning electron microscope. In special cases, the objective of the examination may require the development of less detail than in other cases but, under nearly all conditions, the proper selection and preparation of the specimen is of major importance. Because of the diversity in available equipment and the wide variety of problems encountered, the following text presents for the guidance of the metallographer only those practices which experience has shown are generally satisfactory; it cannot and does not describe the variations in technique required to solve individual specimen preparation problems.

Note 1--For a more extensive description of various metallographic techniques, refer to Samuels, L. E., Metallographic Polishing by Mechanical Methods , American Society for Metals (ASM) Metals Park, OH, 3rd Ed., 1982; Petzow, G., Metallographic Etching, ASM, 1978; and VanderVoort, G., Metallography: Principles and Practice , McGraw Hill, NY, 2nd Ed., 1999.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

A90/A90M Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

E7 Terminology Relating to Metallography

E45 Test Methods for Determining the Inclusion Content of Steel

E768 Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel

E1077 Test Methods for Estimating the Depth of Decarburization of Steel Specimens

E1122 Practice for Obtaining JK Inclusion Ratings Using Automatic Image Analysis

E1245 Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis

E1268 Practice for Assessing the Degree of Banding or Orientation of Microstructures

E1558 Guide for Electrolytic Polishing of Metallographic Specimens

E1920 Guide for Metallographic Preparation of Thermal Sprayed Coatings

Keywords

alloys; grinding; metallography; metals; mounting; polishing; sectioning; specimen preparation (metallographic); Specimen preparation (for testing)--metals/alloys; Structural metals/alloys; Cleaning agents/processes; Electropolishing; Etching (materials/process); Grinding materials/operations; Inclusions--metals/alloys; Metallographic analysis/inspection; Metallurgical materials/applications; Metals and metallic materials--inclusion rating; Microscopic examination--metals/alloys; Mounting materials; Polishing; Sample preparation--metals/alloys; Sampling ferrous alloys;

ICS Code

ICS Number Code 77.040.99 (Other methods of testing metals)

DOI: 10.1520/E0003-01

ASTM International is a member of CrossRef.