Abstract

This guide is intended to provide a rapid, easy to use method for identifying Committee F16 fastener specifications and their applicable marking requirements. Selection is made by product type (bolts, nuts, washers, etc.) and material (alloy steel, carbon steel, stainless steel, etc.). Table size limitations and the need for simplicity prohibit identifying the exact grade, type, condition, etc., for all product/material combinations. The product specification must be reviewed prior to specifying fasteners on drawings or ordering to properly and completely identify the fastener, and its available variations.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This guide is intended to provide a rapid, easy to use method for identifying Committee F16 fastener specifications and their applicable marking requirements. Selection is made by product type (bolts, nuts, washers, etc.) and material (alloy steel, carbon steel, stainless steel, etc.) from as follows:

1.2 Table size limitations and the need for simplicity prohibit identifying the exact grade, type, condition, etc., for all product/material combinations. The product specification must be reviewed prior to specifying fasteners on drawings or ordering to properly and completely identify the fastener, and its available variations.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

A31 Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

A307 Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength

A325 Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

A325M Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)

A354 Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

A394 Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare

A449 Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

A489 Specification for Carbon Steel Lifting Eyes

A490 Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

A490M Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

A502 Specification for Rivets, Steel, Structural

A563 Specification for Carbon and Alloy Steel Nuts

A563M Specification for Carbon and Alloy Steel Nuts (Metric)

A574 Specification for Alloy Steel Socket-Head Cap Screws

A574M Specification for Alloy Steel Socket-Head Cap Screws (Metric)

C514 Specification for Nails for the Application of Gypsum Board

F432 Specification for Roof and Rock Bolts and Accessories

F436 Specification for Hardened Steel Washers

F436M Specification for Hardened Steel Washers (Metric)

F467 Specification for Nonferrous Nuts for General Use

F467M Specification for Nonferrous Nuts for General Use (Metric)

F468 Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use

F468M Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)

F541 Specification for Alloy Steel Eyebolts

F547 Terminology of Nails for Use with Wood and Wood-Base Materials

F568M Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Metric)

F592 Terminology of Collated and Cohered Fasteners and Their Application Tools

F593 Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

F594 Specification for Stainless Steel Nuts

F606 Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets

F606M Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric)

F680 Test Methods for Nails

F738M Specification for Stainless Steel Metric Bolts, Screws, and Studs

F788/F788M Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

F812/F812M Specification for Surface Discontinuities of Nuts, Inch and Metric Series

F835 Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

F835M Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

F836M Specification for Style 1 Stainless Steel Metric Nuts (Metric)

F837M Specification for Stainless Steel Socket Head Cap Screws [Metric]

F844 Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

F879 Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

F879M Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

F880 Specification for Stainless Steel Socket-Set Screws

F880M Specification for Stainless Steel Socket Set Screws (Metric)

F901 Specification for Aluminum Transmission Tower Bolts and Nuts

F912 Specification for Alloy Steel Socket Set Screws

F912M Specification for Alloy Steel Socket Set Screws (Metric)

F959 Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

F959M Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners (Metric)

F1135 Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners

F1136 Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

F1137 Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

F1469 Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing

F1470 Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

F1503 Practice for Machine/Process Capability Study Procedure

F1554 Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

F1575 Test Method for Determining Bending Yield Moment of Nails

F1667 Specification for Driven Fasteners: Nails, Spikes, and Staples

F1789 Terminology for F16 Mechanical Fasteners

F1852 Specification for Twist Off Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

F1940 Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

F1941 Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))

F1941M Specification for Electrodeposited Coatings on Threaded Fasteners (Metric)

F2281 Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

Keywords

ferrous metals; head markings; non-ferrous; products; stainless steel;

ICS Code

ICS Number Code 21.060.10 (Bolts, screws, studs)

DOI: 10.1520/F1077-05

ASTM International is a member of CrossRef.

ASTM F1077